# Removing Ender3 V2 Plastic Nozzle Cover

**URL:** <https://forum.makewithtech.com/t/removing-ender3-v2-plastic-nozzle-cover/2639>\
**Category:** 3d Printing / Slicers / Setup / Problems\
**Created:** [September 25, 2020, 5:20am UTC](https://forum.makewithtech.com/t/removing-ender3-v2-plastic-nozzle-cover/2639 "2020-09-25T05:20:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![JamesBC](https://avatars.discourse-cdn.com/v4/letter/j/278dde/32.png) [@JamesBC](https://forum.makewithtech.com/u/JamesBC)\
**Post date:** [September 25, 2020, 5:20am UTC](https://forum.makewithtech.com/t/removing-ender3-v2-plastic-nozzle-cover/2639/1 "2020-09-25T05:20:46Z")

</div>

Hi. Brand new to the forum and first post.

I just got a Ender3 V2 and was wondering if there is a trick to removing the front plastic cover off the Nozzle/Fan assembly?

Thanks

---

<div class="post-metadata">

**Author:** ![MarcSchuh](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/marcschuh/32/48_2.png) [@MarcSchuh](https://forum.makewithtech.com/u/MarcSchuh)\
**Post date:** [September 25, 2020, 5:26am UTC](https://forum.makewithtech.com/t/removing-ender3-v2-plastic-nozzle-cover/2639/2 "2020-09-25T05:26:54Z")

</div>

There are 3 screws behind the cover. Just removed the screws just be careful the fan is attached.

---

<div class="post-metadata">

**Author:** ![JamesBC](https://avatars.discourse-cdn.com/v4/letter/j/278dde/32.png) [@JamesBC](https://forum.makewithtech.com/u/JamesBC)\
**Post date:** [September 25, 2020, 6:16am UTC](https://forum.makewithtech.com/t/removing-ender3-v2-plastic-nozzle-cover/2639/3 "2020-09-25T06:16:25Z")

</div>

Awesome, thanks for the help Marc!

---

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://forum.makewithtech.com/u/Larry)\
**Post date:** [September 25, 2020, 11:58pm UTC](https://forum.makewithtech.com/t/removing-ender3-v2-plastic-nozzle-cover/2639/4 "2020-09-25T23:58:02Z")

</div>

There is really only one screw that you need to remove and that’s the one between the 2 top rollers. The other screw to the right of that one is to remove the part fan from the plastic cover. I have already had to replace the hot end fan on mine as it went bad already. This is a command problem with the ender 3 v2. And as @MarcSchuh suggest the fan wires for the part fan and the hot end fan are attached plus be careful of the thermistor wires as they can be easily damaged.