# Problem using Beagle 2 camera with Ender 3 pro

**URL:** <https://forum.makewithtech.com/t/problem-using-beagle-2-camera-with-ender-3-pro/8175>\
**Category:** General\
**Tags:** 3d-print\
**Created:** [July 8, 2024, 5:52pm UTC](https://forum.makewithtech.com/t/problem-using-beagle-2-camera-with-ender-3-pro/8175 "2024-07-08T17:52:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Walkrman](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Walkrman](https://forum.makewithtech.com/u/Walkrman)\
**Post date:** [July 8, 2024, 5:52pm UTC](https://forum.makewithtech.com/t/problem-using-beagle-2-camera-with-ender-3-pro/8175/1 "2024-07-08T17:52:24Z")

</div>

Hi, can anybody clarify if it is necessary to keep the video from the Beagle camera running during a print in order to keep the print working? I find it works fine while I keep the video live onscreen. If I open another app, the wifi connection to the camera disconnects and the print goes haywire. Any ideas welcome.