# Prints won’t stick! **URL:** \ **Category:** 3d Printing / Slicers / Setup / Problems\ **Tags:** ender-3-v2, bed-leveling, upgrades, bad-prints\ **Created:** [December 28, 2020, 2:27pm UTC](https://forum.makewithtech.com/t/prints-won-t-stick/2882 "2020-12-28T14:27:44Z")\ **Posts on this page:** 6\ **Page:** 2
**Author:** ![roon4660](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/roon4660/32/35_2.png) [@roon4660](https://forum.makewithtech.com/u/roon4660)\ **Post date:** [December 30, 2020, 11:49am UTC](https://forum.makewithtech.com/t/prints-won-t-stick/2882/21 "2020-12-30T11:49:16Z")
I hope that type of magnetic plate works longer than the one that came with my Ender 3 pro 2 years ago or so. After a couple of months printing I had a hole in the centre where I tended to print the most the size of a silver dollar. I just kept printing around the hole till I finally gave in and bought the glass plate which was supposed to be removable but stuck like shit to a blanket as the Texans say. I never did figure out why that happened. ---
**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://forum.makewithtech.com/u/Larry)\ **Post date:** [December 30, 2020, 3:06pm UTC](https://forum.makewithtech.com/t/prints-won-t-stick/2882/22 "2020-12-30T15:06:31Z")
> [@roon4660](#): > > I hope that type of magnetic plate works longer than the one that came with my Ender 3 pro 2 years ago or so. After a couple of months printing I had a hole in the centre where I tended to print the most the size of a silver dollar. I just kept printing around the hole till I finally gave in and bought the glass plate which was supposed to be removable but stuck like shit to a blanket as the Texans say. I never did figure out why that happened. Yea i heard the pad that came with the ender 3 pro were not made of metal like these are so i can see that happening. ---
**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\ **Post date:** [December 30, 2020, 4:07pm UTC](https://forum.makewithtech.com/t/prints-won-t-stick/2882/23 "2020-12-30T16:07:52Z")
We’ll see. ---
**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://forum.makewithtech.com/u/Larry)\ **Post date:** [December 30, 2020, 6:09pm UTC](https://forum.makewithtech.com/t/prints-won-t-stick/2882/24 "2020-12-30T18:09:11Z")
> [@Ender5r](#): > > We’ll see. I have… ? ---
**Author:** ![Joriha](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@Joriha](https://forum.makewithtech.com/u/Joriha)\ **Post date:** [January 3, 2021, 7:53pm UTC](https://forum.makewithtech.com/t/prints-won-t-stick/2882/25 "2021-01-03T19:53:40Z")
> [@Gramps](#): > > I just had this just happen to me. Make sure the X axis is level with the frame. Wouldn’t bed leveling offset any minor differneces in the X axis orientation with the frame? I’m new to the hobby and learning as fast as I can. ---
**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\ **Post date:** [January 3, 2021, 8:48pm UTC](https://forum.makewithtech.com/t/prints-won-t-stick/2882/26 "2021-01-03T20:48:06Z")
> [@Joriha](#): > > Wouldn’t bed leveling offset any minor differneces in the X axis orientation with the frame? > I’m new to the hobby and learning as fast as I can. Bed leveling will help offset for uneveness in the printbed, but you should do eveything you can to ensure the printer’s frame is as square & solid as you can. Like a house, it all starts with a solid foundation. [Previous page](https://forum.makewithtech.com/t/prints-won-t-stick/2882.md?page=1)