# Printing my design with supports on the Lulzbot Taz causes it to become stuck

**URL:** <https://forum.makewithtech.com/t/printing-my-design-with-supports-on-the-lulzbot-taz-causes-it-to-become-stuck/8294>\
**Category:** 3d Printing / Slicers / Setup / Problems\
**Tags:** print-settings, 3d-print\
**Created:** [November 12, 2024, 3:31pm UTC](https://forum.makewithtech.com/t/printing-my-design-with-supports-on-the-lulzbot-taz-causes-it-to-become-stuck/8294 "2024-11-12T15:31:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jhaberman](https://avatars.discourse-cdn.com/v4/letter/j/49beb7/32.png) [@Jhaberman](https://forum.makewithtech.com/u/Jhaberman)\
**Post date:** [November 12, 2024, 3:31pm UTC](https://forum.makewithtech.com/t/printing-my-design-with-supports-on-the-lulzbot-taz-causes-it-to-become-stuck/8294/1 "2024-11-12T15:31:35Z")

</div>

Any setting suggestions? This rotates with pins in sockets. In case the image doesn’t work I attached a link to a google drive image.

> **[rotatingFidget.png](https://drive.google.com/file/d/1sTVmTHdrQZvvUyuAzxGthW3fZ7KaNMUh/view?usp=drive_link)**
>
> Google Drive file.

 ![Screenshot 2024-11-12 at 10.27.48 AM](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/4/4ac08120ac7623bef60fd11ac9e3ca5b06f538e6.jpeg)

---

<div class="post-metadata">

**Author:** ![Alan](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/alan/32/26_2.png) [@Alan](https://forum.makewithtech.com/u/Alan)\
**Post date:** [November 13, 2024, 4:41pm UTC](https://forum.makewithtech.com/t/printing-my-design-with-supports-on-the-lulzbot-taz-causes-it-to-become-stuck/8294/2 "2024-11-13T16:41:17Z")

</div>

Hi,

Does the part not print with those settings?

FWIW, I prefer more walls. I default to 3, but you may need more to ensure the pins are solid (for strength). I like cubic infill as the nozzle doesn’t cross over previous infill laid down like it does with grid so less chance of the nozzle catching and causing a layer shift. Grid infill is faster and many people use it. I think you can get away with few top/bottom layers. Try 5 or 4 ay a 0.2 mm layer height.

Cheers

---

<div class="post-metadata">

**Author:** ![Jhaberman](https://avatars.discourse-cdn.com/v4/letter/j/49beb7/32.png) [@Jhaberman](https://forum.makewithtech.com/u/Jhaberman)\
**Post date:** [November 15, 2024, 3:53pm UTC](https://forum.makewithtech.com/t/printing-my-design-with-supports-on-the-lulzbot-taz-causes-it-to-become-stuck/8294/3 "2024-11-15T15:53:35Z")

</div>

Works great now thanks!