# Monoprice Ultimate 2 printer correct nozzel **URL:** \ **Category:** 3d Printing / Slicers / Setup / Problems\ **Created:** [December 7, 2021, 2:20am UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485 "2021-12-07T02:20:28Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![carcuss](https://avatars.discourse-cdn.com/v4/letter/c/e47c2d/32.png) [@carcuss](https://forum.makewithtech.com/u/carcuss)\ **Post date:** [December 7, 2021, 2:20am UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485/1 "2021-12-07T02:20:28Z")
Hi Everyone, Can someone point me to a link that would have a steel print nozzle for my Monoprice Ultimate 2 printer? It’s because I want to print metal fill and glow in the dark filaments without wearing out the nozzle. What I’ve done so far: I emailed Monoprice Support and they said it has to be a nozzle type of MK10 . Ordered the wrong nozzel from Amazon: (description below) PrimaCreator PC-NSP-04Hx1-MK10 MK10 Hardened Steel Nozzle 0,4 mm I thought since it said it’s an MK10 one, it would fit but is too big of a diameter. Dont want to keep ordering and returning nozzles to Amazon. Please help. Thanks ---
**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\ **Post date:** [December 7, 2021, 4:04am UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485/2 "2021-12-07T04:04:33Z")
Take a look at your current brass nozzles. Measure the thread diameter. Compare it to the steel nozzle. I’m not positive, but I suspect MK10 refers to a 10mm wide thread. Maybe your brass nozzles are MK8 (8mm). ---
**Author:** ![Alan](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/alan/32/26_2.png) [@Alan](https://forum.makewithtech.com/u/Alan)\ **Post date:** [December 7, 2021, 4:21pm UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485/3 "2021-12-07T16:21:09Z")
This printer is basically a re-branded Weedo F150S, so try looking for steel nozzles for that printer. Cheers ---
**Author:** ![carcuss](https://avatars.discourse-cdn.com/v4/letter/c/e47c2d/32.png) [@carcuss](https://forum.makewithtech.com/u/carcuss)\ **Post date:** [December 8, 2021, 12:49am UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485/4 "2021-12-08T00:49:30Z")
Thanks everyone. Internet chatter about the Weedo F150S says its an Mk8 nozzle, so I will try an Mk8 nozzle and show y’all my findings when I test it. ---
**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\ **Post date:** [December 8, 2021, 12:53am UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485/5 "2021-12-08T00:53:06Z")
Good luck with it. ---
**Author:** ![carcuss](https://avatars.discourse-cdn.com/v4/letter/c/e47c2d/32.png) [@carcuss](https://forum.makewithtech.com/u/carcuss)\ **Post date:** [December 10, 2021, 11:22pm UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485/6 "2021-12-10T23:22:58Z")
Thanks everyone. I got an MK8 nozzle and it fit perfectly on my Monoprice Ultimate 2 3D printer. ---
**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\ **Post date:** [December 11, 2021, 1:48am UTC](https://forum.makewithtech.com/t/monoprice-ultimate-2-printer-correct-nozzel/3485/7 "2021-12-11T01:48:41Z")
Not surprised really. MK8 is a pretty common size.