# Learning things from DR Vax YouTube Video ;o)

**URL:** <https://forum.makewithtech.com/t/learning-things-from-dr-vax-youtube-video-o/7266>\
**Category:** Pictures of Your Builds\
**Created:** [April 17, 2023, 8:33am UTC](https://forum.makewithtech.com/t/learning-things-from-dr-vax-youtube-video-o/7266 "2023-04-17T08:33:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![OZ5RZ](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/oz5rz/32/2311_2.png) [@OZ5RZ](https://forum.makewithtech.com/u/OZ5RZ)\
**Post date:** [April 17, 2023, 8:33am UTC](https://forum.makewithtech.com/t/learning-things-from-dr-vax-youtube-video-o/7266/1 "2023-04-17T08:33:46Z")

</div>

After seeing an interesting videos about adjusting the Filament, it turns out that when  
I asked my Enter 5 plus to run 100mm of filament it didn’t… but now it does.  
A few days ago I saw the Video about Vase mode, and a setup that is not Vase mode, but can  
give a similar result, with the addition that we could change the setup  
ourselves.  
In this test case I made a thicker base and the 3 recommended lines  
of filament in the wall, and it is watertight. I show my result here, and thanks for learning things  
together ;o)  
Else I try to design things I can use in my radio amateur hobby, like this housing for my Hotspot, also shown here…

regards Benny  
(Sorry for my English never learn it, just use what I pick up over the years, and now happy with ‘Word spell control and Google Translate ;o) )

 ![IMG_2193](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/c/c295bf1514bd71e880148817195a319d9374ecf0.jpeg)  
 ![IMG_2195](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/d/dcf5dba97ac26585e451a333650f68177644d0a8.jpeg)  
 ![IMG_1003](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/0/0c28fa44d4fe5d13a159bba8a50c0ecd330d78c4.jpeg)  
 ![IMG_1006](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/8/85d35a026bbd8aaf1e0be0e1962f9633fd08e721.jpeg)  
 ![IMG_1008](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/1/1f83c1db66c77b2d1dc307e67a27648665d60e02.jpeg)  
 ![IMG_1010](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/3/3d81d6ecbe76ab3df287f0a3707995e6974c2733.jpeg)  
 ![IMG_1012](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/1/1845a1562513e1450f82894347bb95165cf9b704.jpeg)