# JG Maker Extrusion Issues

**URL:** <https://forum.makewithtech.com/t/jg-maker-extrusion-issues/3328>\
**Category:** IDEX Multi Material 3d Printers\
**Created:** [August 5, 2021, 9:11pm UTC](https://forum.makewithtech.com/t/jg-maker-extrusion-issues/3328 "2021-08-05T21:11:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![irvshapiro-drvax](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/irvshapiro-drvax/32/8_2.png) [@irvshapiro-drvax](https://forum.makewithtech.com/u/irvshapiro-drvax)\
**Post date:** [August 5, 2021, 9:11pm UTC](https://forum.makewithtech.com/t/jg-maker-extrusion-issues/3328/1 "2021-08-05T21:11:51Z")

</div>

Many people on the JG Maker Facebook page are complaining about under extrusion. I have not had that problem at all. Now it might be because I have the Pro model which was manufactured much later and may have better quality control or it might be JG Maker changed something.

Here is a sample print up close and you can see the quality is quite good.

[ATTACH=JSON]{“data-align”:“none”,“data-size”:“custom”,“height”:“511”,“width”:“511”,“data-attachmentid”:11149}[/ATTACH]

This was printed from IdeaMaker using MatterHacker PLA at 200c, .2mm layer heights, and a default speed of 60mm/s.

 ![jg maker pro test print.jpg](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/d/d34059313b0e96f4beba92e46ac62bae4232a537.jpeg)