# JG Maker Artist-D Dual Extruder

**URL:** <https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915>\
**Category:** 3d Printing / Slicers / Setup / Problems\
**Created:** [January 8, 2021, 4:36pm UTC](https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915 "2021-01-08T16:36:03Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![roon4660](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/roon4660/32/35_2.png) [@roon4660](https://forum.makewithtech.com/u/roon4660)\
**Post date:** [January 8, 2021, 4:36pm UTC](https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915/1 "2021-01-08T16:36:03Z")

</div>

I just was trying to find out what was happening with this kick-starter i e roll out of this machine. I was on the kick-starter site but it was not informative. Perhaps Dr. Vax or Ender 5r have some update.

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [January 8, 2021, 5:31pm UTC](https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915/2 "2021-01-08T17:31:37Z")

</div>

The last update I got is from 28dec2020, which said that a new shipment of printers was about to go to Europe. But, they have also said that the Pro version of the printers will be shipping later than the non-Pro version, and both Irv & I bought the upgrade to the Pro version.

---

<div class="post-metadata">

**Author:** ![roon4660](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/roon4660/32/35_2.png) [@roon4660](https://forum.makewithtech.com/u/roon4660)\
**Post date:** [January 8, 2021, 7:33pm UTC](https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915/3 "2021-01-08T19:33:06Z")

</div>

So it seems to be proceeding all right?

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [January 8, 2021, 7:41pm UTC](https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915/4 "2021-01-08T19:41:03Z")

</div>

I’m not worried so far. Here’s a shot of units supposedly going to Europe:

[IMG2=JSON]{“data-align”:“none”,“data-size”:“full”,“height”:“302”,“width”:“403”,“src”:“https://ksr-ugc.imgix.net/assets/031/856/458/6ec9f7b757c05fa99137e0b868227bb4\_original.jpg?ixlib=rb-2.1.0&w=700&fit=max&v=1609209569&auto=format&gif-q=50&q=92&s=b16daac4b6372cef669b0a34da78e136”}[/IMG2]

---

<div class="post-metadata">

**Author:** ![roon4660](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/roon4660/32/35_2.png) [@roon4660](https://forum.makewithtech.com/u/roon4660)\
**Post date:** [January 8, 2021, 9:45pm UTC](https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915/5 "2021-01-08T21:45:05Z")

</div>

I’m really curious what you and Irv will have for an experience with this printer. The possibilities seem amazing.

---

<div class="post-metadata">

**Author:** ![irvshapiro-drvax](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/irvshapiro-drvax/32/8_2.png) [@irvshapiro-drvax](https://forum.makewithtech.com/u/irvshapiro-drvax)\
**Post date:** [January 13, 2021, 4:19pm UTC](https://forum.makewithtech.com/t/jg-maker-artist-d-dual-extruder/2915/6 "2021-01-13T16:19:05Z")

</div>

I have a Pro version on order. No word yet on when it will arrive.