# Endor 3 Pro Nozzle clogs

**URL:** <https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553>\
**Category:** 3d Printing / Slicers / Setup / Problems\
**Created:** [January 17, 2022, 3:34pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553 "2022-01-17T15:34:37Z")\
**Posts on this page:** 7\
**Page:** 2

<div class="post-metadata">

**Author:** ![Gramps](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/gramps/32/60_2.png) [@Gramps](https://forum.makewithtech.com/u/Gramps)\
**Post date:** [January 31, 2022, 4:15pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553/21 "2022-01-31T16:15:50Z")

</div>

Good to hear, hope all geas well tonight

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [January 31, 2022, 6:00pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553/22 "2022-01-31T18:00:25Z")

</div>

> [@Sully](#):
>
> I replaced the nozzle, installed the heat break and cleaned everything. First print seemed to go well. I did a bencky (Ghost Ship) for fun. Tonight I will start something far more difficult. Fingers crossed. Thank you guys for everything.
> 
> Sully

That’s what we live for 😃 ROTFLMAO

---

<div class="post-metadata">

**Author:** ![Sully](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/sully/32/159_2.png) [@Sully](https://forum.makewithtech.com/u/Sully)\
**Post date:** [February 3, 2022, 7:39pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553/23 "2022-02-03T19:39:22Z")

</div>

3 prints later and it is going great.

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [February 3, 2022, 8:54pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553/24 "2022-02-03T20:54:54Z")

</div>

Ya gotta luv it when a plan comes together.

---

<div class="post-metadata">

**Author:** ![Sully](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/sully/32/159_2.png) [@Sully](https://forum.makewithtech.com/u/Sully)\
**Post date:** [February 18, 2022, 1:08pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553/25 "2022-02-18T13:08:22Z")

</div>

I have to say that the fixes and upgrades each of you have listed here have been great. I have many prints now without an issue. Loving the printer now. LOL

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [February 18, 2022, 3:26pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553/26 "2022-02-18T15:26:25Z")

</div>

All the result of bitter experience @Sully. As the old saying goes, " Experience is the very best teacher".

---

<div class="post-metadata">

**Author:** ![Sully](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/sully/32/159_2.png) [@Sully](https://forum.makewithtech.com/u/Sully)\
**Post date:** [February 24, 2022, 8:16pm UTC](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553/27 "2022-02-24T20:16:26Z")

</div>

Has anyone tested the Creality Ender-3 S1 Pro as yet?

[Previous page](https://forum.makewithtech.com/t/endor-3-pro-nozzle-clogs/3553.md?page=1)