# Ender3 v2 Feet **URL:** \ **Category:** Pictures of Your Builds\ **Created:** [February 21, 2022, 2:51pm UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608 "2022-02-21T14:51:07Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Gramps](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/gramps/32/60_2.png) [@Gramps](https://forum.makewithtech.com/u/Gramps)\ **Post date:** [February 21, 2022, 2:51pm UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608/1 "2022-02-21T14:51:07Z")
I took the cover that blocks the air flow to the power supply off and replaced it with one off Thingiverse. It rerouted the wire bundle a bit which caused the printer to rock. So I designed and printed some feet to raise it up about 10mm which will clear the wires and give a little more air flow. Now the printer is rock solid again. [ATTACH=JSON]{“data-align”:“none”,“data-size”:“custom”,“height”:“263”,“title”:“IMG\_3195.jpg”,“width”:“350”,“data-attachmentid”:14128}[/ATTACH] [ATTACH=JSON]{“data-align”:“none”,“data-size”:“custom”,“height”:“263”,“title”:“IMG\_3196.jpg”,“width”:“350”,“data-attachmentid”:14129}[/ATTACH] ![IMG_3195.jpg](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/a/ab3ba3698855326174fb5bccdebb8394e889245e.jpeg) ![IMG_3196.jpg](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/7/796fba4b3cd229abf3414efa594962996662dbba.jpeg) ---
**Author:** ![Lowteck](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/lowteck/32/154_2.png) [@Lowteck](https://forum.makewithtech.com/u/Lowteck)\ **Post date:** [February 21, 2022, 4:59pm UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608/2 "2022-02-21T16:59:38Z")
Good work! My Artist-D does not have as many mods that can be done, but I did a similar thing with mine. I had some failed Chess squares that had a center rise on one side were they plugged into a larger square. I used some of these to raise and do a level job where the table is not level. It seems to work well for me. So, what is the name of this file? With some height changes it might work well for me. ---
**Author:** ![Gramps](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/gramps/32/60_2.png) [@Gramps](https://forum.makewithtech.com/u/Gramps)\ **Post date:** [February 21, 2022, 6:07pm UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608/3 "2022-02-21T18:07:35Z")
I did the file in FreeCad if you use it you can edit the file to suit your needs [Ender3v2Feet.zip](https://forum.makewithtech.com/uploads/short-url/p8s0WQnYUBiZUkNFM12yFyO1uZH.zip) (22.9 KB) ---
**Author:** ![Lowteck](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/lowteck/32/154_2.png) [@Lowteck](https://forum.makewithtech.com/u/Lowteck)\ **Post date:** [February 22, 2022, 4:40pm UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608/4 "2022-02-22T16:40:57Z")
Thanks! I think most likely it will be fine as is, except maybe height. I will put it to good use! ---
**Author:** ![Gramps](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/gramps/32/60_2.png) [@Gramps](https://forum.makewithtech.com/u/Gramps)\ **Post date:** [February 22, 2022, 4:52pm UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608/5 "2022-02-22T16:52:02Z")
Hope they workout for you. If you have trouble I’d be happy to make them the height you need. ---
**Author:** ![Lowteck](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/lowteck/32/154_2.png) [@Lowteck](https://forum.makewithtech.com/u/Lowteck)\ **Post date:** [February 23, 2022, 3:49pm UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608/6 "2022-02-23T15:49:39Z")
In Cura, I can change the size of the height and each side length or width. Any more elaborate changes like making it round or a triangle would need a CAD program, of which I know nothing about at this time. Thanks for your support! ---
**Author:** ![Gramps](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/gramps/32/60_2.png) [@Gramps](https://forum.makewithtech.com/u/Gramps)\ **Post date:** [February 24, 2022, 12:45am UTC](https://forum.makewithtech.com/t/ender3-v2-feet/3608/7 "2022-02-24T00:45:18Z")
@Lowteck here’s the stl file for the feet [Ender3 v2 Feet.stl](https://forum.makewithtech.com/uploads/short-url/4cPzpyvjjFZ8qk98gkfxSvsehcl.stl) (26.4 KB)