# Cura Slicer **URL:** \ **Category:** IDEX Multi Material 3d Printers\ **Created:** [November 20, 2021, 2:05am UTC](https://forum.makewithtech.com/t/cura-slicer/3459 "2021-11-20T02:05:57Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![bob\_las\_vegas](https://avatars.discourse-cdn.com/v4/letter/b/8dc957/32.png) [@bob\_las\_vegas](https://forum.makewithtech.com/u/bob_las_vegas)\ **Post date:** [November 20, 2021, 2:05am UTC](https://forum.makewithtech.com/t/cura-slicer/3459/1 "2021-11-20T02:05:57Z")
I Just got me first 3d printer but is not listed in cura how can I get it into Cura the build plate is 300 x 300 x 400 do I just look for a listed penter about thst size and use that profile? ---
**Author:** ![Lowteck](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/lowteck/32/154_2.png) [@Lowteck](https://forum.makewithtech.com/u/Lowteck)\ **Post date:** [November 20, 2021, 2:45am UTC](https://forum.makewithtech.com/t/cura-slicer/3459/2 "2021-11-20T02:45:35Z")
Here is a link that you can use to set up your printer: [![](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/f/fac862d57eed7afda5ddd1d18f3945cf156aaf28.jpeg "Setting up a New 3d Printer in Cura") ](https://www.youtube.com/watch?v=Ef7DY4fnNZc) It is presented by @Irv_Shapiro. He has done quite a few and the owner of this forum. He does a very good job on any of his videos. You can learn a lot. ---
**Author:** ![bob\_las\_vegas](https://avatars.discourse-cdn.com/v4/letter/b/8dc957/32.png) [@bob\_las\_vegas](https://forum.makewithtech.com/u/bob_las_vegas)\ **Post date:** [November 22, 2021, 12:31am UTC](https://forum.makewithtech.com/t/cura-slicer/3459/3 "2021-11-22T00:31:31Z")
Thank you for the link