# Complete newbie  - need help adjusting Ender 3 V2...please!

**URL:** <https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085>\
**Category:** 3d Printing / Slicers / Setup / Problems\
**Created:** [March 30, 2021, 5:09pm UTC](https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085 "2021-03-30T17:09:29Z")\
**Posts on this page:** 5\
**Page:** 3

<div class="post-metadata">

**Author:** ![arniep](https://avatars.discourse-cdn.com/v4/letter/a/eb8c5e/32.png) [@arniep](https://forum.makewithtech.com/u/arniep)\
**Post date:** [April 2, 2021, 9:19pm UTC](https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085/41 "2021-04-02T21:19:54Z")

</div>

Thanks Gramps. Hopefully, the new (old) screen will get here next week.  
In the meantime, I watched Dr. Vax’s youtube video about installing Octoprint on a Rpi. I was able to do so and it seems to work, with one problem. There is apparently a bug in the E3V2 firmware in terms of how it reports temperature. It then sends you to the octoprint website where there is a link to a work-around. However, when I log into the octopi via SSH and try to run the workaround script, I get an error message that it cannot find a bash command to run the script. Do you know if there is a way to exit from bash when accessing the octopi via SSH? The scrip starts with the command “pip” which I understand is pertains to python, but is apparently being picked up by bash and bash does not know what to do with it, it seems.  
Thanks!

---

<div class="post-metadata">

**Author:** ![Gramps](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/gramps/32/60_2.png) [@Gramps](https://forum.makewithtech.com/u/Gramps)\
**Post date:** [April 3, 2021, 2:15pm UTC](https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085/42 "2021-04-03T14:15:48Z")

</div>

I got the same report on my RPI too. As I remember I installed a plugin to take care of the problem. I don’t remember having to run a BASH script from SSH, but I might be wrong.

---

<div class="post-metadata">

**Author:** ![Alan](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/alan/32/26_2.png) [@Alan](https://forum.makewithtech.com/u/Alan)\
**Post date:** [April 3, 2021, 3:35pm UTC](https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085/43 "2021-04-03T15:35:02Z")

</div>

I do not have an Ender to test, but it looks like there is an OctoPrint plugin that fixes your problem. From the OctoPrint web interface, go to Settings –\> Plugin Manager –\> Get More … –\> Search for “Creality 2x temperature reporting fix” –\> Install –\> reboot.

Good luck!

---

<div class="post-metadata">

**Author:** ![arniep](https://avatars.discourse-cdn.com/v4/letter/a/eb8c5e/32.png) [@arniep](https://forum.makewithtech.com/u/arniep)\
**Post date:** [April 4, 2021, 2:02pm UTC](https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085/44 "2021-04-04T14:02:38Z")

</div>

Thanks Alan. That was a big help and now it is successfully working.

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [April 4, 2021, 2:57pm UTC](https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085/45 "2021-04-04T14:57:01Z")

</div>

This is a good example of how Open Source can excel.

[Previous page](https://forum.makewithtech.com/t/complete-newbie-need-help-adjusting-ender-3-v2-please/3085.md?page=2)