# Any Prusaslicer 2.x experts in da house? **URL:** https://forum.makewithtech.com/t/any-prusaslicer-2-x-experts-in-da-house/2475 **Category:** 3d Printing / Slicers / Setup / Problems **Created:** [June 14, 2020, 11:25pm UTC](https://forum.makewithtech.com/t/any-prusaslicer-2-x-experts-in-da-house/2475 "2020-06-14T23:25:47Z") **Posts on this page:** 3 **Page:** 1
### Author: ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r) #### Post date: [June 14, 2020, 11:25pm UTC](https://forum.makewithtech.com/t/any-prusaslicer-2-x-experts-in-da-house/2475/1 "2020-06-14T23:25:47Z")
I keep running into an issue wherein PS (stands for PrusaSlicer and Piece of you-know-what ?) insists on including color changes upon slicing. The summary shows a total of 3 colors, but the model is just 1 color, and the vertical scroll bar has no + areas. Is this a bug? ---
### Author: ![irvshapiro-drvax](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/irvshapiro-drvax/32/8_2.png) [@irvshapiro-drvax](https://forum.makewithtech.com/u/irvshapiro-drvax) #### Post date: [June 22, 2020, 9:45pm UTC](https://forum.makewithtech.com/t/any-prusaslicer-2-x-experts-in-da-house/2475/2 "2020-06-22T21:45:11Z")
Interestingly I have not run into this. Here is a video that talks about the Prusa Color change features. Make sure you have not added a color change by mistake. [![](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/3/33badd91cf2943974d62638c7546f87042e2516d.jpeg "Multi Color 3d Prints on Ender 5/3 Using PrusaSlicer vs Cura") ](https://www.youtube.com/watch?v=t2QdRhtaNZs) ---
### Author: ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r) #### Post date: [June 23, 2020, 12:29am UTC](https://forum.makewithtech.com/t/any-prusaslicer-2-x-experts-in-da-house/2475/3 "2020-06-23T00:29:49Z")
I finally just started over with PS, and the problem disappeared ?