# Anet ET5X good start G-code

**URL:** <https://forum.makewithtech.com/t/anet-et5x-good-start-g-code/3148>\
**Category:** 3d Printing / Slicers / Setup / Problems\
**Created:** [April 29, 2021, 4:33pm UTC](https://forum.makewithtech.com/t/anet-et5x-good-start-g-code/3148 "2021-04-29T16:33:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Morgan](https://avatars.discourse-cdn.com/v4/letter/m/0ea827/32.png) [@Morgan](https://forum.makewithtech.com/u/Morgan)\
**Post date:** [April 29, 2021, 4:33pm UTC](https://forum.makewithtech.com/t/anet-et5x-good-start-g-code/3148/1 "2021-04-29T16:33:18Z")

</div>

I had Dr Vax’s but it mysteriously left my cura profiles, I may be the culprit. Now I can’t find it again.

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [April 29, 2021, 4:45pm UTC](https://forum.makewithtech.com/t/anet-et5x-good-start-g-code/3148/2 "2021-04-29T16:45:22Z")

</div>

Can you not simply download DrVAX’s Cura profile again? Also, once you have the gcode, I recommend saving it to a separate text file so you can always recover it if needed.

---

<div class="post-metadata">

**Author:** ![Morgan](https://avatars.discourse-cdn.com/v4/letter/m/0ea827/32.png) [@Morgan](https://forum.makewithtech.com/u/Morgan)\
**Post date:** [April 29, 2021, 4:51pm UTC](https://forum.makewithtech.com/t/anet-et5x-good-start-g-code/3148/3 "2021-04-29T16:51:21Z")

</div>

Can’t find it again his you tube posts have changed

---

<div class="post-metadata">

**Author:** ![Alan](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/alan/32/26_2.png) [@Alan](https://forum.makewithtech.com/u/Alan)\
**Post date:** [April 30, 2021, 7:32pm UTC](https://forum.makewithtech.com/t/anet-et5x-good-start-g-code/3148/4 "2021-04-30T19:32:34Z")

</div>

> [@Morgan](#):
>
> I had Dr Vax’s but it mysteriously left my cura profiles, I may be the culprit. Now I can’t find it again.

What version Cura are you running? One of the older versions had a bug where profiles and materials were linked. Change the material and the profiles would disappear.

Regardless, your profile is still probably on your computer. Look around in the configuration folder (Help \> Show Configuration folder).

Cheers