# About the 3d Printing / Slicers / Setup / Problems category

**URL:** <https://forum.makewithtech.com/t/about-the-3d-printing-slicers-setup-problems-category/2359>\
**Category:** 3d Printing / Slicers / Setup / Problems\
**Created:** [February 1, 2023, 10:05am UTC](https://forum.makewithtech.com/t/about-the-3d-printing-slicers-setup-problems-category/2359 "2023-02-01T10:05:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/1X/7a179c3dba5d9d9fefd30b1ba1182be6211b3905.png) [@system](https://forum.makewithtech.com/u/system)\
**Post date:** [February 1, 2023, 10:05am UTC](https://forum.makewithtech.com/t/about-the-3d-printing-slicers-setup-problems-category/2359/1 "2023-02-01T10:05:19Z")

</div>

If you have questions or are able to help others with questions about 3d printing this is the place for you.

---

<div class="post-metadata">

**Author:** ![Siddarth](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@Siddarth](https://forum.makewithtech.com/u/Siddarth)\
**Post date:** [April 7, 2023, 4:54pm UTC](https://forum.makewithtech.com/t/about-the-3d-printing-slicers-setup-problems-category/2359/2 "2023-04-07T16:54:43Z")

</div>

How can I slice a 3D model (ex. uploaded image) that has an irregular shape and contains multiple pieces, and then convert those slices into 2D drawings(preferably CoralDraw software or Adobe Illustrator)?

 ![Screenshot 2023-04-07 222117](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/e/e6d59fd8c69259fe64522b29a3aaf3fabf474585.png)