# A Cat-astrophe

**URL:** <https://forum.makewithtech.com/t/a-cat-astrophe/3495>\
**Category:** Pictures of Your Builds\
**Created:** [December 14, 2021, 1:46am UTC](https://forum.makewithtech.com/t/a-cat-astrophe/3495 "2021-12-14T01:46:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [December 14, 2021, 1:46am UTC](https://forum.makewithtech.com/t/a-cat-astrophe/3495/1 "2021-12-14T01:46:37Z")

</div>

So yesterday, she who must be obeyed came to me and told me to make a holder for the cats’ litter scoop. She was tired of bits of litter ending up on the floor.

In F360 I designed this:

[ATTACH=JSON]{“data-align”:“none”,“data-size”:“medium”,“data-attachmentid”:13002}[/ATTACH] [ATTACH=JSON]{“data-align”:“none”,“data-size”:“medium”,“data-attachmentid”:13003}[/ATTACH]  
The clip on the left slides down into the slots in the back of the cup on the right.

[ATTACH=JSON]{“data-align”:“none”,“data-size”:“medium”,“data-attachmentid”:13004}[/ATTACH] [ATTACH=JSON]{“data-align”:“none”,“data-size”:“custom”,“height”:“315”,“width”:“365”,“data-attachmentid”:13005}[/ATTACH]  
Installed it today. She is satisfied 🙂

It’s a mundane thing, but it solves her issue. She hasn’t been able to find anything online that would do the job… exactly the kind of thing I most like to print.

 ![CatLitterScoopHolderV2_clip.jpg](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/1/13c684990a2b51d58e7b92d116df22c93cac29ec.jpeg)

 ![CatLitterScoopHolderV2_cup.png](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/a/a8d5a596948a807cc5073c556a8ec408459aa471.png)

 ![_MG_4080.jpg](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/8/812be728b4adbe47c9d327d6ec871df84b324039.jpeg)

 ![_MG_4082.jpg](https://canada1.discourse-cdn.com/flex035/uploads/makewithtech/original/2X/5/5d77c88d2e1c53ad42647b96ec2852dfff20c33f.jpeg)

---

<div class="post-metadata">

**Author:** ![irvshapiro-drvax](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.makewithtech.com/irvshapiro-drvax/32/8_2.png) [@irvshapiro-drvax](https://forum.makewithtech.com/u/irvshapiro-drvax)\
**Post date:** [December 14, 2021, 9:05pm UTC](https://forum.makewithtech.com/t/a-cat-astrophe/3495/2 "2021-12-14T21:05:07Z")

</div>

An excellent example of a practical just-in-time 3d printed model. Doesn’t need to be a perfect print, it just needs to work and be strong enough to keep the cat poop off the floor.

---

<div class="post-metadata">

**Author:** ![Ender5r](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@Ender5r](https://forum.makewithtech.com/u/Ender5r)\
**Post date:** [December 14, 2021, 9:16pm UTC](https://forum.makewithtech.com/t/a-cat-astrophe/3495/3 "2021-12-14T21:16:41Z")

</div>

It was printed using 0.3mm layer height @ 120mm/sec.