Search Result

[Gramps]

When I use glue stick this is what I have been using and has worked well....

[Gramps]

Some really good information thanks for sharing your knowledge Geit...

[Gramps]

I print TPU on Garolite which is slick like glass. I print at a bed temp of 40C and if the parts don't want to come loose I squirt a little isopropyl...

[Gramps]

My SV04 had issues printing TPU was like yours KitCarlson was under extruding. I narrowed it down to the filament sensor. I bypassed it and the under...

[Gramps]

Geit Very nice write up on how and why to use TPU. My 1st experience turned me off to it for a long time. I have 2 rolls of Inland TPU that I could not...

[Gramps]

Maybe you have a bad screen

[Gramps]

Ender5r you may be interested in this https://www.printedsolid.com/blogs/n...nted-solid-inc

[Gramps]

Personally I prefer the screen that comes with the the Ender Pro, I put one on my Ender 3 v2 when I put a EZABL on it. My E3V2 has the 4.2.2 mb too but...

[Gramps]

The picture above looks as though it was in a slicer so that was the reason for the suggestion.

Glad you talked me out of buying an Artist...

[Gramps]

Try flashing the LCD with the attached firmware. You will need a 8gb or less SD card. You will need to open the LCD case and use the SD card slot on the...

[Gramps]

Did the printer come with any 2 color presliced models? If so try printing one of those. That will take the slicer out of the picture.

[Gramps]

The Ender 3 v2 had it's own firmware that needs to match the version of firmware on the MB. Which motherboard do you have in your Pro?

[Gramps]

Right now about the only thing I would do to is is install an all metal hotend. I had the Slice Engineering on on my E3V2 when it had the boden tube....

[Gramps]

3D printers can sure be a thorn in your backside. I don't mind tinkering with stuff but I also want it to work when I need it. I was thinking about buying...

[Gramps]

If I remember right VS Code doesn't like to did down into directories. I do like Ender5r suggested I just put the directory with the firmware on the desktop...